.223REM/5.56 CASES

 

Brass case cal. 223Rem/5.56 x 45 unprimed: manufactured on modern machines, following all the necessary quality control measures

Work with us

Case
Anatomy

For case production high quality brass is used. (CuZn30)

Case mouth

Case mouth is chamfered on both sides for precise bullet installation.

Case mouth

Induction annealed to make the brass softer for a better bullet positioning. Wall thickness is controlled with a very tight tolerance.

Case body

Hardness level is perfectly adjusted: the material is not hard enough for cracks to appear and not soft enough for unnecessary stretching. Full body annealing is performed on the specifically designed machine in the multi-zone inductor.

Case bottom

The case has a boxer primer. Case head is chamfered on with a very tight tolerance on both sides. Has a very high hardness, what does not allow to be damaged even after multiple rounds of reloading.

Case mouth

Annealed to make brass softer in special inductor, that was designed by our team. This allows to hold bullet securely for many years and prevents leak of gas. Wall thickness is controlled with strict tolerances.

Case head

Has maximum hardness and will not be damaged even after multiple usages. Flash holes are made it. Case moMh is chamfered on with a very tight tolerance and both sides for a precise bullet are perfectly centered.

Case body

Hardness level is perfectly adjusted: the material is not hard enough for cracks to appear and not soft enough for unnecessary stretching. Full-body annealing is performed on the specifically designed machine in the multi-zone inductor.

Case mouth

Case mouth is chamfered on both sides for precise bullet installadon

  • Case mouth

    Annealed to make brass softer in special inductor, that was designed by our team. This allows to hold bullet securely for many years and prevents leak of gas. Wall thickness is controlled with strict tolerances.

  • Case head

    Has maximum hardness and will not be damaged even after multiple usages. Flash holes are made it. Case moMh is chamfered on with a very tight tolerance and both sides for a precise bullet are perfectly centered.

  • Case body

    Hardness level is perfectly adjusted: the material is not hard enough for cracks to appear and not soft enough for unnecessary stretching. Full-body annealing is performed on the specifically designed machine in the multi-zone inductor.

  • Case mouth

    Case mouth is chamfered on both sides for precise bullet installadon

Vladcom SIA

Contacts

SIA "VLADCOM"
Robežu street 3A, Kalnciems, Latvia LV-3016
This email address is being protected from spambots. You need JavaScript enabled to view it.

© Vladcom limited | Design by FDS Cards